Water on motor

Tiny
VICENTE NAJERA
  • MEMBER
  • 1991 MITSUBISHI 3000GT
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 175,000 MILES
Hi my mitsubishi 3000gt had a clean engine and now does not start what can I do I checked every single wire and connectors and look good everything can you help me my e-mail is vvicentenajera@aol. Com
Monday, February 28th, 2011 AT 8:03 PM

2 Replies

Tiny
VICENTE NAJERA
  • MEMBER
  • 2 POSTS
I checked every single spark plugs wires are dye connectors are dry I also used a landscaping blower for dry it up and cranks but doesnot start
Was this
answer
helpful?
Yes
No
Monday, February 28th, 2011 AT 8:10 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Cranks but doesnot start

Do below to determine if its fuel or spark problem-

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine atleast 3/16 away from ground-have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem, Do you hear the fuel pump come On when you turn key on? If not check fuel pump fuse and fuel pump relay if okay-check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, cap and rotor, distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it and keep testing
Was this
answer
helpful?
Yes
No
Monday, February 28th, 2011 AT 11:36 PM

Please login or register to post a reply.

Sponsored links