Driver side turn signal does not work replaced.

Tiny
ANONYMOUS
  • MEMBER
  • 1991 CHEVROLET CAPRICE
  • 270,000 MILES
Driver side turn signal does not work replaced all bulbs checked fuses relay still works because the left side works fine and tail lights too. When I put the hazards on the tail lights both blink and the head lights blink all but right side turn signal. In dash the left blinks but right stays solid any suggestions
Wednesday, February 6th, 2013 AT 3:34 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
This cold be a bad turnsig/multi function switch. You'll hav eto check to see if power is coming out of the switch first. Also replace the flasher as that will do it sometimes. Use a test light or volt meter on the dark blue or lt green wire coming from switch
Was this
answer
helpful?
Yes
No
Wednesday, February 6th, 2013 AT 2:37 PM

Please login or register to post a reply.

Sponsored links