Pontiac G6 Computer

Browse Pontiac G6 Computer questions and answers. Choose a question that matches your symptoms.

17 discussions

Limp Mode, Codes P0068, P0030, P0036, P0102, P0135...

2010 PONTIAC G6
I Purchased The Car Listed Above. Flex Fuel From Sister-in-law That Had Been Wrecked In Front End. Her Husband Put Most Of Car Back Together...
3 ANSWERS
6 IMAGES
Asked by G6 craftman

Limp Mode Problem?

2009 PONTIAC G6
I Was Driving Down The Dirt Road The Other Day And The Car Shut Off And Went Into Limp Mode. I Turned It Back On And The Airbag And Horn...
1 ANSWER
Asked by MadcoStone479

Code U0101, Loss Of Communication With TCM?

2009 PONTIAC G6
My Speedometer And Odometer Do Not Work And Car Only Drives In First Gear; It's Not Automatically Shifting. I Have Code U0101, Loss Of...
8 ANSWERS
7 IMAGES
Asked by Pontiacg6gt

What Are The ECM Terminal Pins Are Called, And Where...

2008 PONTIAC G6
I Need To Find Out What The Ecm Terminal Pins Are Called Where I Can Buy Them. I Have 2 Burned Out, We Have New Ecm And Connector All Pins...
5 ANSWERS
17 IMAGES
Asked by Shawnawayne

ECM Connector, How Do I Find Out Exactly What Each...

2008 PONTIAC G6
2 Pins On My Ecm Are Bad. How Do I Find Out Exactly What Each Wire Going To Connector Is For And Color. We Bought A New Connector And...
1 ANSWER
6 IMAGES
Asked by Shawnawayne

Service Traction Control And Reduced Engine Power?

2008 PONTIAC G6
The Car Sputters And Then Loses All Power And It Will Not Go Over 5 Mph With The Accelerator Held To The Floor. When This Occurs The Display...
1 ANSWER
4 IMAGES
Asked by Steve boley

Reduced Power

2008 PONTIAC G6
When I Get Into My Car And Start Driving My Car Will Shift Very Rough And It Will Jerk The Car Around. After I Start Getting Down The Road...
2 ANSWERS
Asked by Wyatt Hicks

No Communication

2008 PONTIAC G6
Hi, I Took My Car To Get Inspected On Friday And When He Hooked Up To Obd2 Plug The Computer Said, "voltage Detected But No Connection...
20 ANSWERS
5 IMAGES
Asked by Kristagiambelluca

No Communication

2008 PONTIAC G6
Will Not Allow Code Readers To Read My Ecm. I Keep Getting "link Error".....any Ideas On How To Troubleshoot And What To Be...
29 ANSWERS
15 IMAGES
Asked by nixa

Error Code Sensor Location

2007 PONTIAC G6
I Have A 2007 Pontiac G6 Gtp, Running Rought Reduced Power And Traction Sysytem Check Message, Dtc Received P0018/p0019 Camshaft Position A...
1 ANSWER
Asked by chrisk228

Browse other repair topics

Browse by repair topic
SymptomsAir FilterBlockCamshaftComputerCrankshaftCylinder HeadFlexplateIntake ManifoldInterchangeKnock SensorMass Air Flow SensorMountOil ChangeOil FilterOil PanOil Pressure SensorOxygen SensorReplace/RemoveSerpentine BeltStarterTiming BeltTiming ChainTune-upWiring

    Can’t find your issue?

    Ask a new Pontiac G6 question