MAZDA B2600 ENGINE

Starts Up Fine But Idle Is Like It Needs A Tuneup, Floods Out And Pops When I Give It Gas.

Ran Good Than It Wouldnt Start Changed The Computor And It Ran Fine Again Now 1year Later Tonight It Wont Start?

Electrical Problem 1990 Mazda B2600 4 Cyl Two Wheel Drive Automatic Have A 90 Mazda B2600 Started Out Cuts Off When Hot Know It Want...

I Have Recently Replaced A Hose On The Underside Of My Intake Manifold From A Water Jet To The Carby Doing This I Had To Remove My Entire...

I Cannot Find My Computer Connector For A Code Scanner, I Look Everywhere Under The Dash No Success. Also Im Trying To Locate My Crank...

My Ute Has No Oil Pressure I Have Removed The Ballance Shaft Chain Would That Hav Anything To Do With Not Having Oil Pressure

The Truck Will Run At About Half Temp When Going. Takes About 2 Miles To Get That Hot. If I Turn It Off Then Back On It Will Read About 3/4...

Just Wondering About Weather My 2001 Model B2600 Petrol Has Tappits Or Hydraulic Lifters As They Are Rattling And About The White Smoke It's...

1993 Mazda B2600 Manual Transmission, Engine Burn Lean.

The Truck Has A Bit Of A Starting Problem, The Head Gasket Was Replaced Recently, The Air Intake Sensor Dosnt Seem To Work, But Works...