Mazda Engine

Browse Mazda Engine questions and answers. Choose a question that matches your symptoms.

3,598 discussions


How Can I Manually Deactivate The Rev Limiter?

2002 MAZDA B3000
I'm Adding Performance Parts To The Engine And Need A Maximum Speed Of More Than 93 Mph To Get It On The Drag Strip. I Dont Wanna Buy A...
1 ANSWER
Asked by tec2011

I Am Having Problems Starting Engine.

2002 MAZDA B2500
I Have A Mazda Pick Up B2500, Sometimes The Glowplug Light Flashes When I Try To Start The Engine, When The Light Is Flashing The Engine...
1 ANSWER
Asked by dragstar

Mazda Millenia 2002 With 90,000 Miles.

2002 MAZDA MILLENIA
I Have An Oil Leak At Valve Covers After Changing To Mobile 1 Oil. I Had The Valve Covers Changed Still Leads A Little But Not As Bad. Car...
1 ANSWER
Asked by stanleyone

How To Check A Flex Plate On A 2002 Mazda Tribute For...

2002 MAZDA TRIBUTE
It's Easier For U See The Two Videos I Made.... Video 1... Http://www.youtube.com/watch?v=xy8-wxchl-i&list=uuorsknwuodc8c7qys1t37ra&index=2...
1 ANSWER
Asked by GeraldLieteau

My Cars Does Not Idle Or Run Properly After The Second...

2002 MAZDA PROTEGE
It Takes A Minute Or More Before It Idle Or Runs Better. I Replaced The Iac .after The Intial Start My Car Idles And Runs Fine, But When I...
1 ANSWER
Asked by super1man

Why Is My Car Revving Up While In Neutral?

2002 MAZDA TRIBUTE
Whenever I Take My Car Out Of Gear It Begins To Rev Up And Can Get Up To 4000rpms Or Higher. I Just Replace The Iac And It Has Not Helped.
8 ANSWERS
Asked by aftrburnrs

What Could Be The Problem?

2002 MAZDA 626
I Tried To Start My Car It Would Not Start There Was Water In My Spark Plugs On My Mazda 2002 626 What Could Be The Problem?
5 ANSWERS
Asked by Shawna Jenkins

2002 Mazda Tribute High Idle Problem

2002 MAZDA TRIBUTE
I Have A 2002 V6 Mazda Tribute That As The Suv. Warms Up It Takes Longer To Come Down To An Idle. It's Not The Throttle Plate Because On...
1 ANSWER
Asked by joewinner1

Timing Belt Tension

2002 MAZDA 626
I Just Replaced Timing Belt On 2002 Mazda 626 With 4 Cyl Engine The Tension Pully Only Has A Small Spring Holding It Tight .i Put Tension...
1 ANSWER
Asked by mrnglls

Mazda 626 2.5 Running Issue

2002 MAZDA 626
Replaced A Timing Belt On A 02 Mazda 626 With 2.5 V6. The Car Came In With With The Timing Off Big Time Due To A Failed Tensioner. Retimed...
2 ANSWERS
Asked by tkmoney

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugEstimateFlexplateGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Mazda question