Mazda Engine Symptoms

Browse Mazda Engine Symptoms questions and answers. Choose a question that matches your symptoms.

2,348 discussions


Sputtering, Backfiring, Hard Start, Engine Light, Slow...

1991 MAZDA
On First Start I Need To Prime By Turning On Fuel Pump Only Three To Four Times And Then Maybe Depress Pedal Once To Start And May Have To...
3 ANSWERS
Asked by LDWilson

Engine Sputters, Stalls While Driving. Fails To...

1991 MAZDA B2200
My B2200 Drives Well For The Most Part But Will Inconsistently Sputter And Struggle Before Stalling While Driving As Fast As 50km/h. It's...
9 ANSWERS
Asked by Yamth

1991 Mazda B2200 Idling Rough

1991 MAZDA B2200
Hi When I Start My Car It Idles Rough Like It Wants To Cut Out For A While Once Warmed Up It Idles High Thn Low And So On Please Help What...
1 ANSWER
Asked by Ironically

1991 Mazda B2200 Running Rough

1991 MAZDA B2200
Hi My 1991 Mazda B2200 Carbureted Truck Starts Fine Runs Great Until It Warms Up Then Starts Sputtering. Wanta To Turn Off At Every Stop And...
5 ANSWERS
Asked by juan m sanchez

1991 Mazda B2600 Mazda Bravo 91 2600

1991 MAZDA B2600
Have Put New Engine In My Car An Number 1 Is Missing An After About 2000 Klm Its Missing On Number 2 Now Can U Help Me With This As I Have...
3 ANSWERS
Asked by hutchy

Cold Weather Start Up-idled Really High, Quit Running...

1991 MAZDA B2600
Truck Had Been Sitting In Cold Weather (last Winter) And Not Being Driven. Started It Up And It Idled Really High (screaming). It Wouldn't...
1 ANSWER
Asked by kdd2013

Backfires , Wont Excelerate

1991 MAZDA B2600
The Truck Has A Bit Of A Starting Problem, The Head Gasket Was Replaced Recently, The Air Intake Sensor Dosnt Seem To Work, But Works When...
1 ANSWER
Asked by trist

What Causes The Engine To Idle High Even After The...

1991 MAZDA 323
What Causes The Engine To Idle High Even After The Engine Reaches Its Normal Operatin Temperature?
1 ANSWER
Asked by Anonymous

The Truck Will Sometimes Crank And Run Fine For A Few...

1991 MAZDA B2600
The Truck Will Sometimes Crank And Run Fine For A Few Minutes Then It Acts Like It Doesn't Have Much Power When You Accelerate It Is Really...
2 ANSWERS
Asked by Chawkins38901

I Changed My Alternator And The Truck Started,then...

1991 MAZDA B2600
I Changed My Alternator And The Truck Started,then Tried To Start It Again And It Won't Start.
1 ANSWER
Asked by Anonymous

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadDipstickDrain PlugEstimateFlexplateGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnock SensorMAP SensorMass Air Flow SensorMountOilOil ChangeOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Mazda question