Mazda Drivetrain

Browse Mazda Drivetrain questions and answers. Choose a question that matches your symptoms.

898 discussions


Why Is Transmission Fluid Mixing With The Engine Oil

1992 MAZDA B2200
Inside The Breather There Is Transmission Fluid And Has To Add Transmission Fluid Every 2 Days. Left Side Of The Engine Is Coated With...
2 ANSWERS
Asked by annaleisa

Automatic Transmission

1992 MAZDA MPV
1992 Mazda Mpv Automatic Won't Upshift From Low, Was Told It Could Be A Wiring Problem?
1 ANSWER
Asked by pdietr1947

1992 Mazda MX3 Clutch And Pressure Plate...

1992 MAZDA MX3
So I Am About To Buy A 1992 Mazda Mx3 With A 1.8l V6 In It And It Needs A Pressure Plate And Clutch. I Have A Pressure Plate And Clutch For...
6 ANSWERS
Asked by jeepxj007

1992 Mazda 626 Clutch Problem

1992 MAZDA 626
Transmission Problem 1992 Mazda 626 4 Cyl Front Wheel Drive Manual While Accelerating Down The Highway, The Car Was Pulling To The...
1 ANSWER
Asked by hairyunicorn

1992 Mazda Miata Clutch

1992 MAZDA MIATA
I Got In The Car This Morning, Never Having A Problem/drove It Yesterday, And Backed It Out Of The Drive..it Would Not Let Me Put It In...
1 ANSWER
Asked by Sandra48

1992 Mazda 323

1992 MAZDA 323
1992 Mazda 323 Two Wheel Drive Manual How Difficult Could It Be To Convert A Mazda 323 From Manual To Automatic Transmission?
1 ANSWER
Asked by bruceht

1992 Mazda B2600 Front CV Half Shafts

1992 MAZDA B2600
Need To Know What Steps Need To Be Taken. To Remove And Replace The Front Half Shafts On My Truck.
1 ANSWER
Asked by roadking05

1992 Mazda B2600 Removal & Replacement

1992 MAZDA B2600
What Are The Steps For Removing And Replaceing The Front Half Shafts On My 1992 4x4 B2600i
1 ANSWER
Asked by roadking05

1992 Mazda 626 Making Sure My Problem Is The Tranny

1992 MAZDA 626
I Recently Pulled Out Of A Parking Spot And Was Driving At A Slow Speed And All Of The Sudden I Heard A Very Loud Bang That Had Come From...
1 ANSWER
Asked by joykai

1992 Mazda MX5 Clutch

1992 MAZDA MX5
I Have Noticed In The Past Couple Months My Clutch Fluid Has Been Just Under Max. It's Been About A 1/8th Or A 1/4th Of An Inch Under The...
1 ANSWER
Asked by kakster

Browse other repair topics

Browse by repair topic
Bearing HubCV AxleDifferentialDrive ShaftTransfer CaseTransmissionWheel BearingWheel Stud

    Can’t find your issue?

    Ask a new Mazda question