GMC P Codes (Powertrain)
Browse GMC P Codes (Powertrain) questions and answers. Choose a question that matches your symptoms.
237 discussions
P0300 Code
Truck Is Running Lean, But Drives Good. Starts Acting Up When I Am Going Slow And In Idle But Not All The Time. I Have Replaced Fuel Tank...
Asked by Eli91013
A/C Slows When Under Load Or Accelerating, Also Code...
Several Repairs Are Underway For My Vehicle At The Moment. Currently, My Focus Is On Maintaining Some Comfort While It Is In Use And Fixing...
Asked by Devon Dunmire
Emission Codes P0332, P0453, P0446, P0405 And P1441
This Is A Slt 1500. I Would Like To Give The Codes I Have Had On This Truck For A While Now. P0332 (knock Sensor Back 2). I Would Like To...
Asked by Packers27
I Have A 2001 Gmc Sierra 1500 And A P0453 Code.
I Have A 2001 Gmc Sierra 1500 And A P0453 Code. Someone Said To Replace The Fuel Tank Pressure Sensor Is This Right? And Is There An Easy...
Asked by lowkee
Unknown P0302 Tech At Shop Has No Clue.
01 6.0 In A Yukon Xl. Cyl #2 Misfiring. Parts Changed/checked ; Head Gaskets, With Valve Job. Coil. Plug Wire. Plug. Injector. Fuel Psi Reg...
Asked by Bkscott
P0420
I Have A 2001 Gmc Sonoma 2wd 2.2 Liter And Have The P0420 Code For Catylyst Efficiency Low Bank One.. I Have A New Cat And Rear O2 Sensor So...
Asked by tallman1781
2001 GMC Yukon Code P0301 - Intermittent
Engine Performance Problem
2001 Gmc Yukon 6 Cyl All Wheel Drive Automatic 130k Miles
I Have An Intermittent Problem That Has Been...
Asked by Michael Holmes
2001 GMC Sonoma P0171 CODE 2001 GMC SONOMA 4.3
My Service Engine Soon Light Comes On Occasionally And Has Stored The Code
P0171. I Can,t Find Any Vacuum Leaks And The Vehicle Has...
Asked by lvmark
2001 GMC Sierra Engine Codes
The Following Codes Come Up What Do They Mean? Can I Fix Them Myself?
P0171
P0174
P0300
P0446
P0449
P1441
Asked by john malley
2001 GMC Sierra CODE P0300
Random Multiple Misfire. #2 And #6 Have Between 1400 And 1800 Misfires. The Rest Of The Cylinders Have Just A Few Misfires. Resent Tune Up...
Asked by bluesmann13
Browse other repair topics
Can’t find your issue?
Ask a new GMC question
