GMC Brakes

Browse GMC Brakes questions and answers. Choose a question that matches your symptoms.

520 discussions


Brakes Worked Fine Until Now.

1996 GMC SIERRA
Replaced Master Cylinder, Bled Master Cylinder And Front Brakes. Tried To Bleed Rear Brakes But No Fluid Or Pressure Came From Rear Bleeder...
1 ANSWER
Asked by ddsterk

Brake Pedal Almost To The Floor

1996 GMC SIERRA
Replaced Master Cylinder, Brake Booster, Front Calipers, New Brake Lines. Bled Lines, And The Whole System And The Pedal Still Goes Almost...
4 ANSWERS
Asked by Rhowert13

Brake Pedal Does Not Come Right Back Up After Pressing...

1996 GMC YUKON
When Stepping On The Brake Pedal Hard The Pedal Stays Down For Five To Ten Seconds Before Releasing And Coming Back. Also, My Vehicle Pulls...
1 ANSWER
Asked by Steve Kerns

The Master Cylinder Seems To Bubble When Pedal Is...

1996 GMC SIERRA
I Have Replace All The Brake Lines Except To The Back I Have Plug Off The Valve. I Have Bled Out The Front And Out To The Back Several Times...
3 ANSWERS
Asked by speeddemonthree

I'm Having A Problem With My Brakes, Replace All The...

1996 GMC SAVANA
I'm Having A Problem With My Brakes, Replace All The Lines And The Master, Bleed The Master But I Still Dont Have A Brake Peddle What Else...
15 ANSWERS
Asked by Wittlechic

"I Just Got New Brake Pads And Calipers For My 1996...

1996 GMC JIMMY
"i Just Got New Brake Pads And Calipers For My 1996 Gmc Jimmy. I Have The Calipers Put Together, But I Can't Figure Out How To Put The...
1 ANSWER
Asked by Anonymous

Clutch Goes All The Way To The Floor Gets Hard To...

1996 GMC SONOMA
Clutch Goes All The Way To The Floor Gets Hard To Shift, Then Drives Fine
1 ANSWER
Asked by Anonymous

Ecessive Brake Travel.

1996 GMC SIERRA
Ecessive Brake Travel. Replaced Master Cylinder, And Bleed The Lines, No Slution. Asked My Dad, He Doesnt Know. Really Slumped On This One.
1 ANSWER
Asked by bdog4444

Where Is The Location Of The Parking Brake Switch?

1996 GMC JIMMY
Just Bought This Jimmy & Replaced Leaking Brake Lines, Both Rear Brake Cylinders And One Front Caliper With Pads On Boith Sides But Pedal Is...
2 ANSWERS
Asked by Stoneyb

1996 GMC Truck Brakes Not Working

1996 GMC TRUCK
I Recently Did Brake Work On My 96 Gmc Jimmy. I Replaces Caliper And Pads On Front Right, Both Front Rotors, Pads On The Drivers Front And...
1 ANSWER
Asked by robert burrell

Browse other repair topics

Browse by repair topic
SymptomsABSAdjustBacking PlateBleed - FlushBoosterBrake FluidCaliperDrumHose (Flex)LeakLineMaster CylinderPadsParking BrakePedalProportioning ValveRotorShoeWheel Cylinder

    Can’t find your issue?

    Ask a new GMC question