GMC Brakes
Browse GMC Brakes questions and answers. Choose a question that matches your symptoms.
520 discussions
2002 GMC Sonoma Rear Rotor
Removed Caliper, And Retaining Rings, Emergency Brake Is Released But Appears To Be Holding The Rotor On, How Do We Remove The Rotor And/or...
Asked by cece
2002 GMC Yukon Front Brakes
I Tried Removing The Front Brake Caliper Assembly To Change The Brake Pads, But After Removing The Two Bolts It Wouldn't Slip Off The Discs...
Asked by Paul Edstrom
Crunching Noise When Brakes Applied
When I Apply My Brakes I Hear A Crunching Noise In The Front Of The Car. I Recently Had The Tie Rods Replaced And Also Have New Front...
Asked by sabzdok
Abs Brakes-2002gmc Sonoma
Brake Pedal Soft When Stopping Goes To Floor With A Noise That Sounds Like Air Leaking
Asked by p125950
Brake Fluid Leaking
My U-joint Failed The Other Day And My Driveshaft Came Off. I Think The Damage Was Caused From The Drive Shaft But It Doesn’t Go Far Back...
Asked by Ianstanislaw
Start The Engine The Brake Pedal Goes To The Floor
My Husband Replaced All The Brake Lines, Bled The Master Cylinder, Bled The Brakes Several Times. When The Car Is Off The Pedal Is Hard. As...
Asked by Melanierc1225
Bled The Brakes But Brake Pedal Is Going To The Floor
I Wanted To Upgrade My Braking System With Newer Parts. So I Changed Out My Brake Calipers Rotors And Brake Lines. Bled The Brakes But Brake...
Asked by Jbricco32
Brake Pedal
Replace Brake Lines, Bled Abs With Scan Tool As Well As Bled Brakes All The Way Around. When Stopping On The Snow Or Ice Brake Pedal Goes To...
Asked by Big Es
Brakes
My Brakes Make A Plopping Noise When Stopping. Speed Limit To About Ten Mph, Brakes Are Fine Unless Stopping Hard. Any Braking Pressure From...
Asked by Jordan Groff
Browse other repair topics
SymptomsABSAdjustBacking PlateBleed - FlushBoosterBrake FluidCaliperDrumHose (Flex)LeakLineMaster CylinderPadsParking BrakePedalProportioning ValveRotorShoeWheel Cylinder
Can’t find your issue?
Ask a new GMC question
