Ford Mustang Engine

Browse Ford Mustang Engine questions and answers. Choose a question that matches your symptoms.

1,599 discussions


1990 Ford Mustang Belt And Starter

1990 FORD MUSTANG
I Have New Motor And Wonder How You Can Check Belt Tensioner. I Was Told If You Could Pull It Up By Hand Was Going Bad. Also Their Is A...
2 ANSWERS
Asked by akace

1990 Ford Mustang Overheating

1990 FORD MUSTANG
Hey There I Drove This Car All Last Year The New Motor Only Has About 5 To 7 Thousand Miles. Most Everything Else Has Also Been Replaced....
3 ANSWERS
Asked by missbama

1990 Ford Mustang Idles To High

1990 FORD MUSTANG
My Mustang Has Had An Idling Problem On And Off For The Last Several Thousand Miles. The Car Is A 5.0, Five Speed With Air And 78000 Miles....
1 ANSWER
Asked by Chodges

1990 Ford Mustang Car Starts But Wont Idle

1990 FORD MUSTANG
My Mustang Starts Perfectly But Right After That The Car Revs Up Then Dies. I Have To Push The Gas In Order For It Not To Die. And It Lags A...
1 ANSWER
Asked by tmac21353

1990 Mustang Wont Crank

1990 FORD MUSTANG
I Have A 1990 Mustang That Wont Crank. The Battery Seems To Be Good. The Battery Charger Says That It Is Charged. I Still Let It Charge For...
3 ANSWERS
Asked by clarklloyd

90 Mustang 2.3 4 Cyl LX Has Bad Engine Tap/knock....

1990 FORD MUSTANG
Mileage- 170,000 My 1990 Ford Mustang Lx Has A Bad Knock Coming From Under The Hood. I've Talked To Many People And Mechanics And They've...
5 ANSWERS
Asked by 90svot3/t4

Vacuum Leak Caused My Car Fail CA Smog Test

1989 FORD MUSTANG
The Check Engine Light Is Not On. Tester Connects Device To Gas Filler And Told Me That There Is A Vacuum Leak. Where Is The Most Likely...
11 ANSWERS
1 IMAGE
Asked by Rob90230

Sealing Flex Plate Bolts

1989 FORD MUSTANG
I Recently Installed A New 302 Crate Motor With A Aod Automatic Transmission, And Failed To Seal The Flex Plate Bolts. The Bolts Are 7/16-20...
11 ANSWERS
Asked by RPMagoo

Low Compression One Cylinder

1989 FORD MUSTANG
Getting A Check Engine Light. Did A Cylinder Balance Test, Number Three Failed. Did A Compression Test, Number Three Had 60 Psi, Number...
3 ANSWERS
Asked by Bmsg43

Stalls After Start Up

1989 FORD MUSTANG
After I Start My Car It Starts And Runs Fine. After A Few Blocks It Acts Like It Has Lost Power. I Push In The Clutch And After Fifteen Or...
3 ANSWERS
3 IMAGES
Asked by canoe169

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCrankshaftCrankshaft PulleyCylinder HeadTickFlexplateFlywheelHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Ford Mustang question