Dodge Durango Engine

Browse Dodge Durango Engine questions and answers. Choose a question that matches your symptoms.

648 discussions


2003 Dodge Durango Crank Shaft Censor

2003 DODGE DURANGO
Engine Performance Problem 2003 Dodge Durango Four Wheel Drive Automatic If The Crank Shaft Censor Was Our Would The Car Still...
1 ANSWER
Asked by paddack

2003 Dodge Durango Stalls

2003 DODGE DURANGO
My Truck Is Making A Funny Noise Not Real Loud But There And It Will Stall At Times When Your Sitting Idle Or At Times When You Are Driving...
1 ANSWER
Asked by Nicci Ayala

2003 Dodge Durango CEL Vacuum Leak

2003 DODGE DURANGO
My Cel Light Will Come On And Will Code For A Vacuum Leak. I Will Have It Reset, And A Day Or Maybe Even A Week Later, It Will Do The Same...
3 ANSWERS
Asked by dpagel

2003 Dodge Durango Rough Idle With Minimal Elecrtical...

2003 DODGE DURANGO
I Took My Durango In To A Shop Because Of Rough Idle In Park Or Stopped At A Red Light. Twice It Has Cut Off Without Triggering Dash...
1 ANSWER
Asked by sandershome8240

2003 Dodge Durango Low RPM At Idle

2003 DODGE DURANGO
Scanner Shows Code 301 Cylinder 1 Misfire Detected, 456 With Evap Leak Small Detected, And 442 Evap Emission Control System Purge Small Leak...
2 ANSWERS
Asked by sean75

2003 Dodge Durango

2003 DODGE DURANGO
When The Heads Were Taken Off And Shaved. Now The Vehicle Won't Start. What Could Be The Problem? Everything Was Marked And Put Back...
2 ANSWERS
Asked by godfather

2003 Dodge Durango Multiple Error Codes

2003 DODGE DURANGO
My 2003 Durango (42000 Mi) Is Stalling With No Warning After The Engine Heats Up And Is Driven Approx 8-10 Miles. I Get Dtc's Of P0352...
1 ANSWER
Asked by peralen10

While Driving The SUV Shut Off, The Engine Turns Over...

2002 DODGE DURANGO
While Driving On The Freeway My Suv Just Stopped Running And Wouldn’t Start, It Turns Over But Won’t Start.
3 ANSWERS
Asked by Limbaga

Code P0335 Crankshaft Position Issue

2002 DODGE DURANGO
I Have Replaced The Cam Sensor And The Crankshaft Sensor 3 Times, And It Is Still Coming Up P0335 Crankshaft Position Sensor Circuit A. I...
8 ANSWERS
2 IMAGES
Asked by Bucksdaman

Crank No Start, Code P0320

2002 DODGE DURANGO
I Have A Code P0320 Crank Shaft Position Sensor. I Replaced The Sensor But Still I Get The Same Code Even After Clearing The Code.my Check...
5 ANSWERS
1 IMAGE
Asked by Fixitjamie09

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCrankshaftCylinder HeadTickEstimateIdle Air ControlIntake ManifoldMAP SensorMountOil LeakOil ChangeOil CoolerOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonReplace/RemoveSerpentine BeltStarterThrottle BodyTiming ChainTune-upVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Dodge Durango question