Dodge Dakota Camshaft Camshaft Sensor Replace/Remove

Browse Dodge Dakota Camshaft Camshaft Sensor Replace/Remove questions and answers. Choose a question that matches your symptoms.

5 discussions

2002 Dodge Dakota Engine Problem

2002 DODGE DAKOTA

Truck Will Start And Run Fine Until It Gets Warmed Up. Then It Starts Running Rough And Dies . Then It May Or May Not Start Until It Cools...

1 ANSWER

Asked by riverbear

2001 DODGE DAKOTA

I Have A 4.7l V8 With Auto. The Check Engine Light Came On With Code P0320. I Was Told That It Is Most Likely A Cam Sensor. I Replaced...

3 ANSWERS

Asked by Anonymous

2000 DODGE DAKOTA

I Just Put A New Engine In This Truck And It Will Not Start. I Have Replaced The Cam Position Sensor And It Still Will Not Start. I Pulled A...

7 ANSWERS

Asked by Krash

1997 DODGE DAKOTA

Dakota 3.9l Autotrans. 126k Miles.turns Over No Crank.xtrans Solenoids Changed Out. Downstream O2,crankshaft Sensor,camshaft Sensor After...

1 ANSWER

Asked by Anonymous

1993 DODGE DAKOTA

Original Transmission W/rebuild In Late 2001. I Replaced The Transmission With A Used Model From A 93 Dakota W/88k Miles. While Removing...

2 ANSWERS

Asked by rrobi75406

Browse by repair topic

Can’t find your issue?