DODGE ENGINE NOT RUNNING

Everything Works, No Codes. Crank Don't Start No Sparks In Plugs.

Replaced Ecm, Cks, Ignition And Electrical Switches. It Was Running, After Replaced Ecm. The Fuses Are Okay. Asd And Fuel Pump Relays...

We Put In A New Battery And The Van Started Up Fine. Then It Quit Running But All The Lights And Everything Came On, So We Replaced A Fuse...

I Had A Grinding Sounds From Under The Hood, Now The Engine Will Not Turn Over?

When I Push The Brakes To Start My Car I Have To Push It To Run Before It Will Start.

Sometimes Will Not Start In Park Unless Lever Is Put In Park Roughly, And Never Starts In Neutral.

I Have Changed The Distributer Cap, Rotor, Fuel Pump, Coil, The Truck Still Won’t Start. Checked The Cam Shaft Sensor And All Fuses...

We Took The Car To Autozone And Tested Things To See Why The Car Wouldn’t Start After Getting Battery Jumped Enough To Get There. Bad...

Truck Will Start And Drive Good For A While Until Engine Is At Normal Temperature, But If You Stop At A Location And Cut Truck Off Go In...

New Distributor (3 Wires Have Hall Effect Sensor In It) And Cap, New Coil, New Ecu. Not Getting Fire To The Plugs. Will Turn Over But...