CHRYSLER PT CRUISER

The Car Stalled While I Was Driving Home From Work And Would Not Restart. The Battery Is Still Strong. Did The Key Test And Where You Turn...

I Just Had My Head Gasket And Timing Chain Replaced Because It Was Overheating. Now About A Month Later It Is Overheating Again. I Have...

Do I Have To Use Mopar Atf+4 For The Transmission After Fluid And Filter Replacement? Or I Can Use Any Other Atf+4 Brand As Castrol Transmax...

No Compression In One And Three Cylinders. Will Not Start. Replaced Camshaft Sensor, Cam Sender Plugs And Wires.

Had An Upstream O2 Sensor Code, It Was Running Rough Until It Was Warm. Replaced O2 Sensor Now Idle Is High.

Cooling Fan Quit. Car Over Heated. Replaced Fan. Temperature Is Normal Now, But Now No Heat. Replaced Thermostat, Still No Heat. Also, A/...

Today I Checked The Car For Codes I Found P0218 Transmission Overheat. What Can Cause This And How To Check Transmission Fluid Level? Check...

Looking To Install A New Pair Of Control Arms Myself. Anybody Has Detailed Instructions? Thanks

The Only Code That Shows When You Turn The Key From Off To Run Three Times Fast Is P0513. I Cannot Find The Meaning Of This Code.

It Started About Four Or Five Times Ran For A Few Seconds Then Stalled. After The Fifth Time It Will Not Turn Over Engine When Key Is Turned...