Chevrolet S-10 Drivetrain
Browse Chevrolet S-10 Drivetrain questions and answers. Choose a question that matches your symptoms.
640 discussions
1996 Chevrolet S-10 Cant Get Trans Back In
Changed Flywheel Clutch And Pressure Plate And Now Cant Get Trans Back In Connected To Bell Housing Used Alignment Tool And Aligned It...
Asked by jerrydsize44
1996 Chevrolet S-10 Transmission
P1886 Upshifts Fine But Hard,speedo Ok.transmission Was Recently Replaced And Everything Seens In Place.fluid Level Is Good And Filter Is...
Asked by joelen
1996 Chevrolet S-10 Transmission
Changed Engines, Transmission Started Shifting Hard And When You Stopped At Stop Sign It Won't Down Shiftvautamatically. You Can Shift It...
Asked by topsargesfc1
Appears That Concentric Slave Cylinder Is Leaking...
Appears That Concentric Slave Cylinder Is Leaking Somewhere But I Just Can't Actually See Source Of Leak. Cylinder Looks Pretty Simple...
Asked by LionLamb
Drive Shaft Will Not Go All The Way Into Tranny Stops...
Drive Shaft Will Not Go All The Way Into Tranny Stops About A Inch Or 2 Short Of Going All The Way In
What Could Be Stopping It Or Do I...
Asked by Anonymous
1996 Chevrolet S10 Wont Shift Into Gear
The Shifter Goes All The Way Down With No Engagement While The Truck Is Running, And The Brake Engaged. I Took It To A Mechanic When The...
Asked by popeye1
My Chevy S10 Clutch Squills And Smokes While Engine Is...
My Chevy S10 Clutch Squills And Smokes While Engine Is Running
Asked by byron braden
1996 Chevy S10 Stuck In 4wheel Drive,high
I Checked The Vacuum Actuator And It Seems Fine And There Is Vacuum To It. There Is A "motor Engaging" Noise Under The Truck By The Transfer...
Asked by azschaechner
Transmission Problems
1996 Chevrolet S10 4wd Pickup Will Not Go When In Drive. Will Go In 1st Gear And Reverse. Once In 1st And Going Can Put In Drive.
Asked by tammy1234
Browse other repair topics
Can’t find your issue?
Ask a new Chevrolet S-10 question
