Chevrolet Camaro Engine

Browse Chevrolet Camaro Engine questions and answers. Choose a question that matches your symptoms.

1,346 discussions


1968 Chevy Camaro Play In Driving

1968 CHEVROLET CAMARO
Car Has Alot Of Play (jeaks Back And Forward) When Not Accelerating. The Transmission Is New And The U-joints Are New. The Rear End Has...
1 ANSWER
Asked by Tommy143

Engine Vibration

1968 CHEVROLET CAMARO
Shakes Or Wobbles Problem V8 Two Wheel Drive Manual 60000 Miles I Have A 1968 Chevy Camaro With A 327 Engine. I Have Developed A...
1 ANSWER
Asked by 68camaross

1968 Chevy Camaro Oil Usage

1968 CHEVROLET CAMARO
Should A Zz502 Crate Engine With 4000 Miles On It Use A Quarter Of A Quart Of Oil After Driving For 2 Hours At 3500 Rpm. I Already...
1 ANSWER
Asked by TREX678

1968 Chevy Camaro

1968 CHEVROLET CAMARO
1968 Chevy Camaro Hello-- I Have An 1968 Camaro Rs/ss With A Supercharged 427. My Question Is How Difficult/time Consuming Is It...
1 ANSWER
Asked by CarGuy451

1968 Chevy Camaro Engine Stalls When Putin Gear

1968 CHEVROLET CAMARO
My 1968 Camaro Had A Fresh Restoration And When I Put It In Gear It Stalls. Seams To Idle Ok But Does Shift A Little Hard. Have To Keep...
1 ANSWER
Asked by brett@fimloans.com

1968 Chevy Camaro Rear Pinion Seal Leaking

1968 CHEVROLET CAMARO
Drive Train Axles Bearings Problem 1968 Chevy Camaro 00000 Miles I Had A Professional Rebuild And Replace The Ring And Pinion In...
1 ANSWER
Asked by ronbway

1968 Chevy Camaro Oil Pressure

1968 CHEVROLET CAMARO
I Have A 68 Camaro With A 350 Chevy. Oil Pressure Has Dropped From 48 Psi To 42 Psi After Warm Up At 3000 Rpm. The Two Things I Have Done...
1 ANSWER
Asked by Eric Benninghoven

1968 Chevy Camaro Backfiring When Cold

1968 CHEVROLET CAMARO
Hello, Although The Car Is Old, The Engine Is A Brand New Jasper 350 With An Edelbrock 600 Cfm Carb And A New Mallory Ignition. The 93,000...
5 ANSWERS
Asked by Camaro1968

68 327 Hydraulic Lifters Removal

1968 CHEVROLET CAMARO
I Have A 68 327 Engine From A 68 Camaro. It Has Lots Of Valve Noise. I Want To Remove The Cam And Lifters. It Has Been Some Time Since I...
7 ANSWERS
Asked by shanjohnson

1/2" Hole In Edelbrock Performer Head

1967 CHEVROLET CAMARO
Hi, I've Been Following The "how To Build A Bbc" Series As I'm Building My Own Iv 454. It's Been Invaluable To Me, So...
4 ANSWERS
2 IMAGES
Asked by Jonathon67

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickFlexplateFlywheelHarmonic BalancerIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Chevrolet Camaro question