Buick
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralGlobal KeywordsIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Turn Key All Dash Light Work But Will Not Start
I Was Having Overheating Problems So I Took My Car To The Mechanic, Not My Usual Mechanic Because His Shop Has Been Closed For Some Reason...
Asked by JuanJGutierrez
Car Will Crank But It Will Not Start
My Car Was Running Good Then It Overheated. After That It Was Hard To Start And It Idled Erratically. Water Pump Was Leaking So I Replaced...
Asked by Pdmis1
Side View Mirrors Replacement
Hi, I Have The Car Listed Above Sport Coupe G Bodyand Both Side View Mirrors Are Shot. I'm Not Looking To Throw Originals Onto The Car...
Asked by Forensics
Car Will Not Crank Or Start
My Boyfriends Car Recently Stopped Working It’s A 3.1l V6 Codes Aren’t Attached We Replaced The Ignition Switch.
Asked by Erika Hibbert
Transmission Fluid Leak
Need Help To Determine If A Transmission Fluid Leak Is The Pan Or Internal. The Transmission Cooler Lines Are Good.
Asked by buick_dude
PCM,BCM, U/H Relay Fuse Keeps Blowing
It Started By Blowing The Fuse Every Time I Tried Starting It, But If I Unplug The Last Plug From The Black Box Under The Steering Column.
Asked by Jyeary91
Code P1811, Transmission Shifting Hard
The Transmission Shifts Hard After Reaching Normal Operation Temperature. It Shifts Fine When It's Cool. What Causes This Code And How...
Asked by Ray Dawkins
Valve Stem Seals Replacement
Hi, I Believe The Valve Stem Seals Are Shot On My 305 Due To The Fact That On Startup And Idle It Blows Light Amounts Of Smoke Out The...
Asked by Forensics
Serpentine Belt Replacement I Cannot Get Tension...
Changing Drive Belt On 2.4 Ecotec Engine. I Cannot Get Tension Spring To Compress After New Belt Is On It Is Off By Less Then Quarter Inch....
Asked by timshowalter946
Ask a new Buick question
