YD25 engine

2010 NISSAN NAVARA
290,000 MILES • 2.5L • 4 CYL • TURBO • 2WD • MANUAL
Avatar
NDIYE STRAW BOTANA
  • MEMBER
  • 1 POST
i have a problem with a YD25 engine that does not idle,its for 2010 Nissan Navara. i have changed the camshaft position sensor and crank position sensor.
May 29, 2016 at 7:27 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
try cleaning throttle plate on both sides and iac hole with choke cleaner then check fuel pressure with a gauge. also scan for codes as you mayhave already changed out good parts.

https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator

https://www.2carpros.com/articles/throttle-actuator-service
May 29, 2016 at 11:00 PM
Avatar
RENEE L
  • MEMBER
  • 1,260 POSTS
Hi Ndiye Straw Botana,

Here is a link to an article that features written step by step instructions and pictures explaining how to do the scan yourself, also I have included a link to our YouTube channel with a how to video on code scanning. Most scanners are inexpensive to purchase, you can purchase one online from sites like Amazon.com. Once you have the codes please get back to us so that we can further assist you. We are always happy to help.

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

https://youtu.be/YV3TRZwer8k

Thank you for visiting 2CarPros.com.

Kindest regards,

Renee
Admin
May 31, 2016 at 8:08 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.