Advertisement
Advertisement

Wiring for fuel pump circuit from start to end

189,000 MILES • 3.0L • V6 • 2WD • AUTOMATIC
Avatar
FLOYD LUSK
  • MEMBER
  • 1 POST
Fuel pump will work. I need pump wiring diagram so I can see were all wires go and what they do no power to rear at tank. I have made a jumper wire to check pump that is the only way it runs. Thanks
Jun 24, 2018 at 6:01 PM
Avatar
KASEKENNY
  • ✓Experienced Mechanic
  • 18,907 POSTS
More then likely the fuel pump fuse in the PDC has failed. Take a look at the wiring diagrams I attached below and you can follow power back through the system. If the fuse is ok, then the relay is most likely the next issues.

Here are some guides that will help with this:

https://www.2carpros.com/articles/how-to-check-a-car-fuse

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

Run through this material and let me know what questions you have. Thanks
Dec 19, 2020 at 3:59 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement