white blue- ish smoke

2011 TOYOTA RAV4
48,000 MILES • 6 CYL • AWD • AUTOMATIC
Avatar
KIMMYS
  • MEMBER
  • 10 POSTS
when i get onto interstate and punch on the gas to go, a big puff of blue ish white smoke comes from back of rav 4 even if i slow down than push on the gas again it smokes no engine light ,no miss nothing and it doesnt smoke unless i punch on the gas


i just got the vehicle this past saturday from a dealer ship they told me i had to take it to toyota to see whats wrong i am so disappointed
Feb 24, 2016 at 2:22 PM
Advertisement
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
That's a pretty serious issue. It usually means severe internal wear but that would be a shock at that mileage. The engine could also be totally sludged up from lack of oil changes causing oil to collect in the valve cover from plugged up drains. That would also be a very serious problem. You DO need to get a professional diagnosis to determine the actual problem. That doesn't necessarily have to be done by the dealer. There are many capable Independent shops. I would stay away from the chain shops though.
Feb 24, 2016 at 3:16 PM
Avatar
KIMMYS
  • MEMBER
  • 10 POSTS
ok thank you they told me the car was very well taken care of only one owner they only drove it to church ,store and home
Feb 24, 2016 at 3:22 PM
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
Oh sure, it was a little old lady and she only drove it on sunny days. I hope you didn't believe a word of it.
Feb 24, 2016 at 3:39 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.