Transmission leak from input connect to seal

2000 DODGE INTREPID
260 MILES • V6 • AUTOMATIC
Avatar
NEEN
  • MEMBER
  • 2 POSTS
I have this problem in the transmission leak which I go underneath the car and checked the leak. then I see it from where it connects to the engine.

Main leak is from ( transmission input seal where it connects to the engine). what would you advise me to do? is that seal inside cost much ?

waiting for reply.

Regards
Dec 18, 2016 at 12:58 PM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
The input shaft seal only costs a few bucks, but the transmission has to be removed to replace it.

There is also a vent at the top of the pump. Fluid can make its way up there if it is foaming. That will leak out at the same place on the bottom, but replacing the seal will not solve it. That can be caused by overfilled fluid that is getting air whipped into it by rotating parts, or if the pump is sucking up air. The clue is a pump seal leaks all the time the engine is running. Foaming from the vent only occurs when the car is moving, and it may not occur at low speeds.
Dec 18, 2016 at 1:18 PM
Avatar
NEEN
  • MEMBER
  • 2 POSTS
How much does it cost to replace the transmission according to your professional expertise ? Thanks
Dec 19, 2016 at 10:16 PM
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
prices vary so ours could be wrong but anywhere from $1800-2000 for a recuilt
Dec 20, 2016 at 7:41 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.