tires were rotated. Tire pressure light on.How to reset the light.
Jun 15, 2008 at 10:14 PM
2001 Toyota Sienna reset tire pressure light
ABALDINO1
- MEMBER
- 1 POST
Advertisement
The system require initializing after changing tires and or rotating wheels
When tire pressure warning light blink twice every second system need to be initialize
and to do so
1. set the tire pressure of all wheels to specified pressure on door jam tag
2. with the vehicle stopped and parking brake applied turn the ignition switch to on position
3. press and hold the tire reset switch until warning light blink 3 times at one second intervals
4. continue pressing the switch for about 3-4 seconds
5. then release
6. start and drive the van it may take up to 8 hr of driving to complete the initializing procedure
When tire pressure warning light blink twice every second system need to be initialize
and to do so
1. set the tire pressure of all wheels to specified pressure on door jam tag
2. with the vehicle stopped and parking brake applied turn the ignition switch to on position
3. press and hold the tire reset switch until warning light blink 3 times at one second intervals
4. continue pressing the switch for about 3-4 seconds
5. then release
6. start and drive the van it may take up to 8 hr of driving to complete the initializing procedure
Jun 15, 2008 at 11:12 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.