I hit a 1990's old Toyota on the back

1990 TOYOTA
Avatar
OLDHONDA1
  • MEMBER
  • 1 POST
Hi, last weekend the road was full of snow here in Canada, and due to the road and my self not looking, i have hit a 1990's old Toyota car on the rear bumper. the bumper looks fine and there are no damage marks on it, but it is loose on one side. The bumper is still on the car on both side. The person i hit went into an auto shop and, they are asking for $250-$350 to reinstall it. The question i have is "is this the right price?" since there were no damage to the car body since the speed i hit her car was around 20-30.
Jan 30, 2007 at 2:21 PM
Advertisement
Avatar
RASMATAZ
  • Experienced Mechanic
  • 75,992 POSTS
[quote:73e4c72907="oldhonda1"]Hi, last weekend the road was full of snow here in Canada, and due to the road and my self not looking, i have hit a 1990's old Toyota car on the rear bumper. the bumper looks fine and there are no damage marks on it, but it is loose on one side. The bumper is still on the car on both side. The person i hit went into an auto shop and, they are asking for $250-$350 to reinstall it. The question i have is "is this the right price?" since there were no damage to the car body since the speed i hit her car was around 20-30.[/quote:73e4c72907]

That's what happens when we follow to close-always our fault. Be careful next time. Okay-you probably bent something underneath and needs time
to get realign or whatever- Yeap its a little on the high side-if you can get the owner to agree on a 2nd quote somewhere else-might be less. My 2cts its highway robbery.

Good Luck!
Jan 30, 2007 at 5:53 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.