2003 Toyota Corolla compressor

2003 TOYOTA COROLLA
150,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
LANKY1984
  • MEMBER
  • 1 POST
I recharged the compressor in my G/F's corolla this is a task that I have done hundreds of times on my own vehicles. and just so you know i am not a green horn i have done it on 5 s-10's that i owned 2 silverado's 1 f-150 and one f-250 that i owned myself. I charged her car on Saturday her dad noticed it making a loud noise on the following friday and it is a roaring sound. and it gets louder and quieter kinda like a whooping sound. at least that is what they described to me over the phone as i am out of town on business and will not be returning for a few months. supposedly it only makes the sound if the fan is on it but i had a friend of mine go look at it and he says tha compressor is making the noise and is shaking badly. appaerntly it only makes the sound if the fan is on. as the compressor on this car can be turned on with or without the fan on. what might the problems be here i am thinking maybe the compressor is freezing up or the bearing could be bad. what suggestions might you have? I need to do more investigation to see what could be wrong but i am hoping that the compressor does not need changed right now.
May 15, 2010 at 6:13 PM
Advertisement
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Hi lanky1984, Welcome to 2carpros and TY for the donation

Sounds like the compressor is on its way out-locking up could be due to lack of oil
May 15, 2010 at 6:19 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.