Advertisement
Advertisement

1998 Toyota Camry Exterior Driver's Side rear door handle r

230,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
RHOLMSTEAD
  • MEMBER
  • 1 POST
I need to replace the driver's side rear exterior door handle. To do so I need to remove the inside door panel. How do I remove the inside rear door panel?
Nov 27, 2009 at 5:09 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
Hi rholmstead,

I do not have any diagrams to show you so will only be able to provide some written instruxtions.

Remove any holding screws, look out for concealed screws and the panel can be pried out as the edges are clipped on.

If this is a manual window, the regulator handle has to be removed first, use a pice of cloth to slot between the handle and door panel, twist the cloth arounf the regulator and you can get the holding clip to come off and remove the handle.
Nov 27, 2009 at 11:27 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement