1998 Toyota Camry can't stop shaking

100,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
KEYSERSOZE
  • MEMBER
  • 1 POST
I have a 98 Toyota Camry V6 that has a vibration at highway speeds. I had the front end aligned because the front tires were worn on the inside edge (not rotated properly), and was told that it was already within specs. I bought 4 new tires and it still vibrates after I took them back and had them rebalanced. I am thinking possibly the CV axles need to be replaced but I hate to throw money at that if that is not the problem. I do not hear any clicking while turning but have noticed that there is "play" in the drive train when going between coasting and accelerating while on the highway. I'm sure the struts could use replacing but I don't think that any are completely shot. I haven't noticed any play in the steering either. Also, I had a four wheel brake job recently and stopping is smooth. Any advise would be appreciated.
Dec 12, 2007 at 4:43 AM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,992 POSTS
You might be right with the CV Joints-also might want to have all the mounts engine/tranny inspected.

Could also be the ignition system is weak when you get up to cruising speed. Have the ignition system check with an oscilloscope
Dec 12, 2007 at 5:07 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle