I found Engine sensor-2 fuse blown. I replaced it and it blew again. Fuse is a 10a.
Aug 28, 2024 at 11:27 AM
The engine will not start?
2011 HYUNDAI GENESIS
GENESIS626
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
All right! This will be fun :) so there are 8 main circuits with many sub circuits especially for the ECM. I can tell you I have seen oxygen sensor heaters short out, (any of the four) and the MAF sensor have problems, let's start by unplugging them all and see if the fuse still blows (you might need a small box of fuses). Here are the locations of the sensor and a complete list of what is on that fuse. Check out the images (below). Please upload pictures or videos in your response of any problems so we can see what to help you with.
Images (Click to enlarge)
Aug 29, 2024 at 11:05 AM
Advertisement