injector pulse

SUBARU
Avatar
WINGJOHN
  • MEMBER
  • 4 POSTS
'01 subaru outback, 2.5,MT. Just installed an engine from a 2000, had auto trans. Had to change the intake, and swap to flywheel. No injector pulse. Swapped all sensors, thinking perhaps they were different.Still no pulse. Does Subaru ground injectors through the ecm? Help!
Aug 30, 2007 at 10:26 AM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
[quote:fd79afe6e6="wingjohn"]'01 subaru outback, 2.5,MT. Just installed an engine from a 2000, had auto trans. Had to change the intake, and swap to flywheel. No injector pulse. Swapped all sensors, thinking perhaps they were different.Still no pulse. Does Subaru ground injectors through the ecm? Help![/quote:fd79afe6e6]

Type of ignition system do you have- Could be a CMP or CKP sensor not sending it the ECU to activate the injectors. Even if the ECU grounds the injector-it has to get an ignition signal to pulse the injector/s.
Aug 30, 2007 at 4:41 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.