starts, drives and cuts out

2000 VAUXHALL ZAFIRA
180,000 MILES • 1.8L • MANUAL
Avatar
ZOET
  • MEMBER
  • 4 POSTS
Hi there, the car runs and drives, but then cuts out and you have to wait a while for it to restart. I have had diagnostic test done and I computer connected saying thermostat problem. Then the car will cut out and the computer will not connect to the car. I have had the thermostat changed. I am now being told by two different mechanics it is the ECU. Please help. i have a special needs child who i am unable to get to school.
Sep 14, 2017 at 12:22 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,872 POSTS
Yes I think it is the computer as well. Try to get a used one this will save money. It may need to be programmed you may get away with not having to.

Please let us know what happens.

Cheers, Ken

Sep 14, 2017 at 4:33 PM
Avatar
ZOET
  • MEMBER
  • 4 POSTS
Thank you. Sent ECU away for repairs and they found two problems so £228. To fix just waiting for part to come back to re fit.
Sep 14, 2017 at 10:27 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,872 POSTS
Please let us know what happens so it will help others.

Cheers, Ken
Sep 15, 2017 at 3:42 PM
Avatar
ZOET
  • MEMBER
  • 4 POSTS
Ok it was the ecu and air mass sensor. Great place repaired it. The ecu doctor in Plymouth. All running now so far so good
Sep 17, 2017 at 10:41 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,872 POSTS
Nice work, we are here to help, please use 2CarPros anytime.

Cheers, Ken
Sep 17, 2017 at 12:06 PM
Avatar
ZOET
  • MEMBER
  • 4 POSTS
Hi there i have aanother question on the car. My eml is on an had ddiagnostic test and got a fault code of p0110 air temperature sensor high. I finally got the part but have no idea where it goes on the car. ive been told it is on the pipe after the air mass sensor going towards the throttle body but my pipe has nothing on it can anyone help locate it please .
Mar 15, 2018 at 1:50 PM
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,119 POSTS
It will be in the air intake system, it may be part of the MAF sensor or installed in the manifold itself.
Would it be possible to post pictures here of the sensor and the engine intake ? Looking at the engines online there are a number of variations shown.
Mar 15, 2018 at 2:56 PM