Stabilitrak, check engine light on

2016 CHEVROLET COLORADO
55,000 MILES • 2.8L • 4 CYL • TURBO • 4WD • AUTOMATIC
Avatar
DANDO1020
  • MEMBER
  • 1 POST
Usually when going into reverse my stabilitrak light goes off as well as the trailer brake light. Check engine also comes on there is some times a clunk when I put it in reverse from park and well as the brakes kind of having a sticky sound.
Jan 19, 2020 at 5:06 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
KASEKENNY
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 18,907 POSTS
If this only happens in reverse we need to check codes because this could be just a vehicle speed sensor or more serious like a module. Does this happen when going into reverse and you do not move or is it when you start moving?

Let's get the codes in the computer and go from there. If you cannot pull codes, most parts stores can. Just make sure their scan tool can communicate with the ABS module because you may have a code in there due to the stability system.
Jan 19, 2020 at 2:24 PM
Advertisement