P1155 code

DRIFTERDRUMMER

MEMBER
2004 HYUNDAI SANTA FE
3.5L
V6
4WD
AUTOMATIC
12,000 MILES

Injector malfunction still there after repairing wires and changing the injector on cylinder two. Threw me a p1155 code. I found out I left unplugged wire to TED. What should I do now? I understand there is a procedure to reset it so it can relearn itself. Anyone familiar with this procedure? Please explain.

Monday, September 12th, 2016 AT 11:47 AM

5 Replies

HMAC300

MECHANIC
48,601 POSTS

It takes a scanner to erase codes an auto parts store may do it.

Was this

answer

helpful?

Yes

Monday, September 12th, 2016 AT 12:01 PM

DRIFTERDRUMMER

MEMBER
15 POSTS

Took it to two auto parts stores neither one could erase it. Said it had two other permanent codes stored also. I just need to know how to reset the ETS? I read it somewhere. Also saturntech9, which injector harness will work on my car?

Was this

answer

helpful?

Yes

Monday, September 12th, 2016 AT 2:11 PM

HMAC300

MECHANIC
48,601 POSTS

This may be a PCM problem which should be investigated by a mechanic. If you still have a wire disconnected reconnect it if you took it off. If you did not then it may go to something else.

Was this

answer

helpful?

Yes

Monday, September 12th, 2016 AT 3:20 PM

DRIFTERDRUMMER

MEMBER
15 POSTS

The wire was disconnected by me. I forgot to reconnect it. I reconnected it. How do I get the com tested or ECM? Injector wire looks like rodent chewed it. I replaced his just just that one. Should I try to find a 3.5 injector harness? What other harness will fit it?

Was this

answer

helpful?

Yes

Monday, September 12th, 2016 AT 3:54 PM

HMAC300

MECHANIC
48,601 POSTS

If you repaired it by soldering and using shrink wrap then it is okay. A professional should check the ECM because if it is bad he has to program it to your car anyhow.

Was this

answer

helpful?

Yes

Monday, September 12th, 2016 AT 4:37 PM