Rough idle

235,000 MILES • 2.2L • 4 CYL • 2WD • AUTOMATIC
Avatar
COUNTYA
  • MEMBER
  • 12 POSTS
Idle is only rough when cold. And then I have to drive at least five miles before idle smooth out. I have checked and cleaned idle speed control, vacuum leaks, and most systems to do with idle. As I said, idle smooth out once car is driven a number of miles. Can you please give me some ideas to help me solve my idle problem.
Jan 3, 2017 at 7:06 AM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check for an air or vacuum leak when it heats up and goes into closed loop it is probably richening the fuel mix to compensate.
Jan 3, 2017 at 7:19 AM
Avatar
COUNTYA
  • MEMBER
  • 12 POSTS
I have checked for air and vacuum leaks without any results. Both appears to okay. It is evident that the computer is not receiving the right signal when engine is cold.
Jan 3, 2017 at 7:27 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
if it is running okay when warm then the computer is richening the mix on fuel to compensate for rough idle. try cleaning throttle plate and IAC hole on both sides with choke cleaner. air leaks can be hole in ductwork from MAF to engine, a bad grommet on valve cover etc. then check fuel pressure with a gauge auto parts rent it.
https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator
Jan 3, 2017 at 8:34 AM
Avatar
STEVE W.
  • ✓Experienced Mechanic
  • 15,415 POSTS
Yes, classic symptom of a vacuum leak. The parts do not seal when cold but once the engine warms up the leak goes away.
How did you look for a leak? Most of the tricky ones can only be found using a smoke machine because of the location. One item to check that is missed a lot is the EVAP purge solenoid. If it sticks open even a small amount it acts as a vacuum leak, and because it is internal you will not find it unless you actually test the EVAP system.
Jan 3, 2017 at 9:49 AM
Avatar
COUNTYA
  • MEMBER
  • 12 POSTS
I forgot to mention that the idle is not so rough when just idling. But once I put into gear it idle way to rough.
Jan 4, 2017 at 1:30 AM
Avatar
COUNTYA
  • MEMBER
  • 12 POSTS
Idle okay when cold, but once you put into gear and put a load on it it starts to idle rough. But once you drive it about five miles it starts to smooth out under load.
Jan 4, 2017 at 1:55 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
i would bet you have a misfire. have this scanned for codes auto parts does for free.
Jan 4, 2017 at 3:58 AM
Avatar
RENEE L
  • MEMBER
  • 1,260 POSTS
Hi COUNTYA,

If you decide you would like to conduct the scan yourself here is a link to an informative article from the 2CarPros site that features written step by step instructions and pictures explaining how to scan for codes yourself. I have also included a link to our YouTube channel with a how to video on code scanning.

This is applicable even if your check engine light is not on.

Most scanners are inexpensive to purchase, you can purchase one online from sites like Amazon.com

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

https://youtu.be/YV3TRZwer8k

Once you have the codes please get back to us so that we can further assist you. We are always happy to help.

Thank you for visiting 2CarPros.com.

Kindest regards,

Renee
Admin
Jan 4, 2017 at 5:58 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement