I just need a diagram or be told where or to what the line attaches to so it's not rubbing on the other belts, etc.
May 4, 2022 at 10:21 PM
Replacing power steering pressure line
2000 PONTIAC MONTANA
KEBBERS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Good morning,
I attached the procedure below for you to replace the pressure hose. It shows what port it goes into on the steering rack.
https://www.2carpros.com/articles/how-to-replace-a-power-steering-hose
https://my.alldata.com/repair/#/repair/article/33950/component/827/itype/376/nonstandard/601989/selfRefLink/true
Let me know if you have any other questions.
Roy
I attached the procedure below for you to replace the pressure hose. It shows what port it goes into on the steering rack.
https://www.2carpros.com/articles/how-to-replace-a-power-steering-hose
https://my.alldata.com/repair/#/repair/article/33950/component/827/itype/376/nonstandard/601989/selfRefLink/true
Let me know if you have any other questions.
Roy
May 5, 2022 at 1:12 AM
Advertisement