What tools and size do I need to replace the rear brake pads ?
Jul 9, 2018 at 11:31 AM
Rear brake pad replacement
2011 DODGE NITRO
FTED
- MEMBER
- 3 POSTS
Advertisement
Hello, I am Danny.
Just a quick question first. Are they rear disc brakes or drum brakes? Danny-
Just a quick question first. Are they rear disc brakes or drum brakes? Danny-
Jul 9, 2018 at 11:47 AM
They are disc brakes Danny.
Jul 10, 2018 at 7:29 AM
Hello again.
I have attached a tutorial link showing what it takes to change your rear disk brakes.The sockets you will need are usually 10mm-19mm. If you are not replacing the rotors be sure to have old ones turned (machined) to make the surface true again (Pep Boys, O'Reilly's, Napa). Hope this helps! Feel free to ask any needed questions and thanks again for using 2CarPros. Danny-
https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors
I have attached a tutorial link showing what it takes to change your rear disk brakes.The sockets you will need are usually 10mm-19mm. If you are not replacing the rotors be sure to have old ones turned (machined) to make the surface true again (Pep Boys, O'Reilly's, Napa). Hope this helps! Feel free to ask any needed questions and thanks again for using 2CarPros. Danny-
https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors
Jul 10, 2018 at 8:22 AM
Thanks Danny !
Jul 16, 2018 at 11:11 PM
Use 2CarPros anytime, we are here to help. Please tell a friend.
Cheers, Ken
Cheers, Ken
Jul 19, 2018 at 4:41 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.