Loud noise coming from the front after replacing the rack and pinion

2005 PONTIAC G6
170,000 MILES • 3.1L • 6 CYL • 2WD • AUTOMATIC
Avatar
SHELLY LAMBERT
  • MEMBER
  • 1 POST
We replaced the rack and pinion as well as our tie rod ends on our car and now there is a loud squealing and rubbing sound in the front. help what it is?
Sep 15, 2020 at 2:04 PM
Advertisement
Avatar
KASEKENNY
  • ASE Certified Mechanic
  • 18,907 POSTS
  • ASE Certified Mechanic
More then likely this is air in the power steering system or your rack is faulty. Can you get a recording of the noise and then give us the procedure you used to purge the air out of the system?

Here is a guide on how to flush the system which may be the best idea at this point:

https://www.2carpros.com/articles/power-steering-fluid-flush

Let me know if you can get the video and we can go from there. Thanks
Sep 15, 2020 at 6:25 PM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Hi,

Do you only hear the noise when the vehicle is moving? Have you inspected the rear of the tires to make sure nothing is touching? Was the vehicle aligned after the work was done? Is there anything that changes the sound's pitch? For example, when applying the brakes does it change? Was the new rack and pinion properly bled when it was installed?

If the sound is evident when the vehicle is not moving, open the hood and inspect the accessory drive belts to make sure nothing is making contact.

If possible, record the sound and upload it for me so I can hear it. Let me know anything you can think of that will help me with the diagnosis.

Take care,
Joe
Sep 15, 2020 at 6:26 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.