I was just wondering how to program a new throttle body on the Dodge Grand Caravan listed above.
Jul 20, 2020 at 3:40 PM
Programming new throttle body
2008 DODGE CARAVAN
JOHN BALTHROP
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
The relearn process requires a scan tool that can communicate with the electronic throttle control unit. From the scan tool, one would select ETC, relearn, and then enter.
I wish I had an easier answer, but that is right from the manual. The same procedure is applicable when replacing the accelerator pedal position sensor.
Let me know if you have other questions.
Take care,
Joe
The relearn process requires a scan tool that can communicate with the electronic throttle control unit. From the scan tool, one would select ETC, relearn, and then enter.
I wish I had an easier answer, but that is right from the manual. The same procedure is applicable when replacing the accelerator pedal position sensor.
Let me know if you have other questions.
Take care,
Joe
Jul 20, 2020 at 3:49 PM
Advertisement
This new scanner can do everything you need:
https://youtu.be/InIlnsjOVFA
Please run down this guide and report back.
https://youtu.be/InIlnsjOVFA
Please run down this guide and report back.
Jul 21, 2020 at 11:41 AM