Power steering control module?

I changed my power steering control module, and i'm still having issues with no turn signals. Why?

Here are a few things that can couse this to happen

The sccm wire plugs could be loos not snapped all the way or
Sccm not did take well to the vehicles features especially if it was a used one has to come from the same model with the same interior exteriorlighting features different vehicles have different lighting features
If it came frome another vehicle I might not take ti some of the features
Also sonetimes if the clockspring wasnt aligned accurately this can confuse the sccm as to where the steering wheel position is this can happen

Could be simply a blown fuze check those

Most times if you have a bi directiinal scan tool it can be easily re configured/reset ..often times youl get all your features right back

Good luck hope this helps