1995 Pontiac Grand Prix proper bleeding of A.B.S. brakes

1995 PONTIAC GRAND PRIX
94,700 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
AUTOTECHSTUDENT
  • MEMBER
  • 1 POST
I was wondering what the proper way to bleed the brakes was. I was in a minor accident ( not my fault) and when I pressed my brakes, the line to my passenger rear line busted. I am in the process of replacing the line right now but was curious if I need to bleed the system at the master cylinder and at each wheel or what?
May 12, 2010 at 10:11 AM
Advertisement
Avatar
MERLIN2021
  • ASE Certified Mechanic
  • 17,250 POSTS
  • ASE Certified Mechanic
Depends on how long... did the master empty out? If so you will need to bleed at the master, then the abs unit, then the service brakes, but some ABS units require a scan tool to command bleeding of the unit.. This car has diagonal braking system. rr and lf work paired off the master and lr rf work off the other port.
May 12, 2010 at 10:16 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.