1990 Pontiac Grand Am intermittly dies puting it in gear

109,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
STICK2248
  • MEMBER
  • 4 POSTS
hi i have 1990 pontiac with tech4 4cylender in it. intermittily the car stumbles and dies when putting it in gear. starts right back up idlles fine put it in gear and dies. wait a few min. start it up put it in gear and drive away. NOTE. tcc is opperating normal. coulld this be an ign.modual? thanks for your time i dont have very much money but i will donate what i can. THANKS
Jan 25, 2010 at 12:24 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
It could be an ignition module, but they usually take time to heat up before causing problems.

Has the check engine light come on? Have you checked the EGR? Vacuum leaks?
Jan 25, 2010 at 1:42 PM
Avatar
STICK2248
  • MEMBER
  • 4 POSTS
No engine light and checked for codes, none.
yes i checked all vacume leaks, none found. checked egr. ok .
the problem happends only when warmed up and is very intermitently. doesnt do it all the time. thanks for your time.
Jan 26, 2010 at 10:50 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
I would be looking at the ign module or fuel pump pressure. Have you checked fuel pump pressure when this happens? Here is a how to:


https://www.2carpros.com/how_to/how_to_check_fuel_pressure.htm

Let me know what you find.
Jan 27, 2010 at 3:21 PM
Avatar
STICK2248
  • MEMBER
  • 4 POSTS
fuel pressure is 12-13 psi when it happends. pulled ing.modual off and checked for cracks in ckp sensor. all looked good no crosion on modual and conections good. man im confused. this car is kicking my but. i tapped tested the pcm. good.
Jan 28, 2010 at 11:41 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
According to my information, fuel pressure should be as follows:

40-47 PSI for Key On Engine Off (KOEO)

30-44 PSI for Key On Engine Running (KOER)
Jan 28, 2010 at 3:00 PM
Avatar
STICK2248
  • MEMBER
  • 4 POSTS
its a 2.5L 4 tech throttle body man..... isnt it 14-17 psi on throttle bodys? if it was the quad 4 2.3L it would be 40-47 psi. not trying to be a smart ass just trying to fix the car right. and wrong info isnt gona help me none. please let me know if THE CORRECT PSI is 40-47 or 14-17 psi on THROTTLE BODY INJECTION. KOEO


THANKS BOYS
Jan 29, 2010 at 1:48 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
I could have sworn I read it was the quad 4. If it's the tech 4, you are correct.
Jan 30, 2010 at 3:53 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle