Please help torque settings

2008 HYUNDAI GETZ
120,000 MILES • 1.4L • 4 CYL • 2WD • MANUAL
Avatar
COOLIOMYR
  • MEMBER
  • 3 POSTS
I need the main bearing and big end torque setting.
May 18, 2019 at 1:51 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STEVE W.
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 15,146 POSTS
Hello and welcome to 2CarPros. From the information I can find on that car and the 1.4 engine the main bearing cap torque is 54-59 Nm or 40-44 ft.lb. Rod bearing torque numbers are 31.5 - 34 Nm or 23-25 ft.lb. Hope that helps.
May 19, 2019 at 7:43 PM
Advertisement
Avatar
COOLIOMYR
  • MEMBER
  • 3 POSTS
Thank you very much.
May 20, 2019 at 12:16 PM
Avatar
STEVE W.
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 15,146 POSTS
You are welcome, please return anytime with your automotive questions.
May 20, 2019 at 2:43 PM