Passenger power sliding door not functioning

2006 DODGE CARAVAN
90,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
STRATOSTAN
  • MEMBER
  • 2 POSTS
Hello. I replaced my passenger side sliding door lock actuator, the power door worked before I did this. I found I had issues with the manual handle after I got the lock to work. While trying to fix this issue, I think I screwed up something in the door. The power lock does not work now even with the new actuator and the power sliding door stopped working. I have checked the wiring harness and could not locate a break, is there anything else I can try? I also removed the fuse that I had seen refenced for 15 minutes to reset the computer, that did not do it. The driver's side works so I don't think it is the fuse. Is there another fuse in line by the door? Please help. Thank you
Jul 13, 2014 at 7:42 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Have you checked to see if there is power to the actuator?
Jul 13, 2014 at 8:01 PM
Advertisement
Avatar
STRATOSTAN
  • MEMBER
  • 2 POSTS
How would I check that? It did work and then stopped after I had the issue with the door closing and kind of freezing up.
Jul 14, 2014 at 5:30 AM
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Just actuate the solenoid and check to see if there is power to it when you do that. You can use a test light or a multimeter
Jul 14, 2014 at 7:14 PM