P0606-00

2010 GMC YUKON
70,500 MILES • 5.6L • V8 • 2WD • AUTOMATIC
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
Hi again,
code of P0606-00
is that mean ECU it self is broken?
your assistance please.
thanks
May 21, 2017 at 9:10 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
I am sorry, code is P0606-00 (control module internal performance).
thanks
May 22, 2017 at 2:29 AM
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
for more details: customer informed me that he drives his GMC Yukon in heavy rain and throw high level of water .
thanks
May 22, 2017 at 4:34 AM
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
P606 is control module processor problem it is stored in the freeze frame section you can try to erase it but it may come back. I would put dielectric grease on the connection at PCM and tell the person to quit driving through water he is lucky it runs. if it will not clear then another ECM/PCM.
May 22, 2017 at 6:47 AM
Advertisement
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
how I can clear it forever ?
May 22, 2017 at 8:44 AM
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
if it continues to come back then the ECM needs to be replaced of course you will need to reprogram the security system for truck to start.
May 22, 2017 at 12:11 PM
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
thanks for great assistance
May 23, 2017 at 12:06 AM
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,176 POSTS
Please let us know what happens. I am curious ;)

Cheers, Ken
May 26, 2017 at 2:47 PM