oil pan removal

1997 CHEVROLET S-10
140,000 MILES • 4.3L • V6 • 2WD • AUTOMATIC
Avatar
KENE HANSELMAN
  • MEMBER
  • 1 POST
I can not get the oil pan off. I have the engine raised up and the 10 bolts out of the oil pan and the 3 bolts out of the transmission housing to the oil pan. I also have the filter and the housing piece (can not think of the name of it) its attached to removed. But I can not get it to budge. Am I missing something? And what are the two rubber grommets hanging down at the back of the oil pan there for?
Mar 4, 2017 at 8:22 PM
Advertisement
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
The rubber grommets hides 2 more bolts. Remove them to gain access to the remaining bolts.
Mar 5, 2017 at 8:30 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
you are supposed to remove the engine to get pan off because you can't get the crank to turn enough to squeeze it by
Mar 5, 2017 at 8:32 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.