Engine cranks but doesn’t start, engine code 2A9A.
Replaced crank and cam sensor.
Replaced crank and cam sensor.
Oct 2, 2023 at 6:56 PM
Code E52, E67 and F40, engine cranks but does not start?
2010 BMW 528I
JAODONNE
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
When cranking the engine, does it sound normal? In other words, do you notice any difference in the sound or speed the engine turns?
I ask because the sensors you replaced are relevant, but there are other things that may be causing the issue. My biggest concern is if there is an issue with the timing chain.
Is it possible for you to record it cranking and upload it for me to hear? I should be able to tell if it is timing-related
Take a look through this link as well, you may find it of interest:
https://www.2carpros.com/articles/car-not-running-advanced
Let me know.
Joe
When cranking the engine, does it sound normal? In other words, do you notice any difference in the sound or speed the engine turns?
I ask because the sensors you replaced are relevant, but there are other things that may be causing the issue. My biggest concern is if there is an issue with the timing chain.
Is it possible for you to record it cranking and upload it for me to hear? I should be able to tell if it is timing-related
Take a look through this link as well, you may find it of interest:
https://www.2carpros.com/articles/car-not-running-advanced
Let me know.
Joe
Oct 2, 2023 at 9:07 PM
Advertisement