The vehicle listed above has a problem with code po732 and it does not go on reverse.
Sep 6, 2022 at 8:30 AM
No reverse, code po732, is it the shift solenoid problem?
2007 HYUNDAI SANTA FE
THOMAS LATORRE
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hello,
This code is set if the value of input shaft speed is not equal to the value of the output shaft, when multiplied by the second gear ratio, while the transaxle is engaged in second gear. This malfunction is mainly caused by mechanical troubles such as control valve sticking or solenoid valve malfunctioning rather than an electrical issue.
I would suggest first checking the transmission oil level and quality. The fluid should be red/light brown and not smell burned.
https://www.2carpros.com/articles/how-to-check-and-add-transmission-fluid
Cheers, Boris
This code is set if the value of input shaft speed is not equal to the value of the output shaft, when multiplied by the second gear ratio, while the transaxle is engaged in second gear. This malfunction is mainly caused by mechanical troubles such as control valve sticking or solenoid valve malfunctioning rather than an electrical issue.
I would suggest first checking the transmission oil level and quality. The fluid should be red/light brown and not smell burned.
https://www.2carpros.com/articles/how-to-check-and-add-transmission-fluid
Cheers, Boris
Sep 6, 2022 at 8:44 AM
Advertisement