No brake pedal?

2001 LINCOLN TOWN CAR
100,450 MILES • 4.6L • V8 • 2WD • AUTOMATIC
Avatar
JLGADAMS
  • MEMBER
  • 1 POST
I replaced the rotors, calipers, pads, and master cylinder even the parking brake shoes. I had the brakes bleed. The brake pedal still goes to the floor. I had good brakes before I replaced anything. I smelled burning brakes in the back of the car. So I was just going to replace everything. Now no brake pedal.
May 18, 2023 at 6:52 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,189 POSTS
So, it sounds like you have air stuck in the ABS unit which is common, and you need to have a scanner open the valve while you bleed the brakes. Please check these two guides out to help us fix the problem.


https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system

and

https://www.2carpros.com/articles/brake-pedal-goes-to-the-floor


Please go over these guides and get back to us.
May 18, 2023 at 12:32 PM
Advertisement