how do you change the engine belt on a 2005 maxima.
Apr 10, 2009 at 1:06 PM
2005 Nissan Maxima engine belt
2005 NISSAN MAXIMA
JUANCORONA
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Remove undercover with power tool.
Remove alternator and power steering oil pump belt by loosening the idler pulley lock nut located between the alternator and crankshaft pulley.
Remove A/C compressor belt by loosening the idler pulley lock nut located between the crankshaft pulley and A/C pulley.
CAUTION
Grease is applied to idler pulley adjusting bolt. Be careful to keep grease away from belt.
To install, reverse removal procedure.
Tighten the following to specification:
Alternator and power steering oil pump belt idler pulley lock nut: 24-28 ft. lbs. (31-38 Nm). A/C compressor belt idler pulley lock nut: 24-28 ft. lbs. (31-38 Nm).
Remove alternator and power steering oil pump belt by loosening the idler pulley lock nut located between the alternator and crankshaft pulley.
Remove A/C compressor belt by loosening the idler pulley lock nut located between the crankshaft pulley and A/C pulley.
CAUTION
Grease is applied to idler pulley adjusting bolt. Be careful to keep grease away from belt.
To install, reverse removal procedure.
Tighten the following to specification:
Alternator and power steering oil pump belt idler pulley lock nut: 24-28 ft. lbs. (31-38 Nm). A/C compressor belt idler pulley lock nut: 24-28 ft. lbs. (31-38 Nm).
Apr 17, 2009 at 2:01 AM
Advertisement