1994 Nissan Maxima

1994 NISSAN MAXIMA
150,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
EJKOROL
  • MEMBER
  • 2 POSTS
did tune up, all but timing. allworked well untill son entered door code and changed fuse in trunk. fusable link on positive cable burned, all elect. did not work. replaced fusiable link, elect works but car will only start if battery fully charged and when warm back fires and dies. this is son's car and we can't aford mechanic.
Thanks for any help
Edward
Nov 7, 2008 at 2:19 PM
Advertisement
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,837 POSTS
  • ASE Certified Mechanic
Hi Ed, It sounds like you may have burned out the alternator and some injectors, this condition happens when the battery is jump started with the wrong termanils. please referre to this page


https://www.2carpros.com/how_to/how_to_jump_start_car.htm

thanks for visiting, let me know if you need anything else.
Nov 13, 2008 at 2:00 PM
Avatar
EJKOROL
  • MEMBER
  • 2 POSTS
[quote:8bd7f8a0ed="2CarPro Ken"]Hi Ed, It sounds like you may have burned out the alternator and some injectors, this condition happens when the battery is jump started with the wrong termanils. please referre to this page


https://www.2carpros.com/how_to/how_to_jump_start_car.htm

thanks for visiting, let me know if you need anything else.[/quote:8bd7f8a0ed]

the car has been jumoed correctly, thanks. Will the alternator caus the engine to back fire and die when warm?
Nov 13, 2008 at 2:12 PM
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,837 POSTS
  • ASE Certified Mechanic
yes,
Nov 13, 2008 at 2:17 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.