93000 Nissan Xterra Overheating

2012 NISSAN 300ZX
Avatar
SLOPEZ62
  • MEMBER
  • 1 POST
My Nissan Xterra's temperature gage on the dash indicates that the vehicle is overheating only when driving and the Cool air or Air Conditioning is turned on. My thermostat is fine, and so are the radiator hoses, water pump and belts. Could it be ther temperature sending unit?
May 16, 2007 at 6:10 PM
Advertisement
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
[quote:2cfdc307b6="Slopez62"]My Nissan Xterra's temperature gage on the dash indicates that the vehicle is overheating only when driving and the Cool air or Air Conditioning is turned on. My thermostat is fine, and so are the radiator hoses, water pump and belts. Could it be ther temperature sending unit?[/quote:2cfdc307b6]

Could be the coolant temperature sensor or a bad thermostat-or an AC idle up solenoid not coming on to compensate the load of the compressor.

Have it block and pressure tested-do the block first to pinpoint a combustion leaking into the cooling system or a gas analyzer to sniff for hydrocarbons at the radiator fill neck.

Pressure test: do not do a pressure test if there's leakage at the headgasket this might cause coolant into the cylinders and lock it up or bend a connecting rod if cranked thereafter. The headgasket should be repaired before doing the pressure test.

If the block and pressure test passes check the following: Thermostat,Clogged radiator,Fan clutch,Radiator electrical fan,collaspe hoses,water pump.

Hope this helps-Good Luck
May 18, 2007 at 5:56 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.